A website by Lamers Reinigingstechniek B.V., Zelhem, the Netherlands+31 (0)314 623 341 WhatsApp 06-38048347 info@lamersequipment.nlNL EN DE

Air duct cleaning in Almere

Air duct cleaning Almere starts with one question: which buildings in your portfolio have a ventilation system that has never been inspected since handover? According to Statistics Netherlands (CBS), Almere had 31,655 business establishments in 2024, and every building with mechanical supply and extract has ducts that need maintenance. Anyone who wants to keep those ducts clean needs an inspection plan and the right machine for the duct sizes installed in the building.

  • Family business with over 50 years in cleaning equipment
  • Danduct Clean DC4, PD4 and Intelligent Airnozzle
  • Duct brushes for ducts from 100 to 600 mm
  • Lamers Reinigingstechniek B.V. in Zelhem, the Netherlands
Air duct cleaning in Almere: portrait of René Hendriksen, Sales Account Manager at Lamers Reinigingstechniek (contact card in the hero)

René Hendriksen, Sales Account Manager
Call +31 (0)314 623 341, message us on WhatsApp 06-38048347 or request a callback.

Air duct cleaning in Almere: duct cleaning kit with machine case, drive shaft and brushes in various diameters (photo by Lamers)

On this page we translate the figures for Almere into maintenance needs. You will read why new ducts can also be dirty, what schools and care locations have to arrange and which Danduct Clean equipment belongs with which situation. Lamers Reinigingstechniek supplies that equipment from Zelhem in the Netherlands; the cleaning itself is done by your own maintenance team or by a cleaning contractor.

Are you a facility manager, installer or manager for a school board in the province of Flevoland? Then this gives you a practical basis for deciding what you bring in house and what you outsource.

Air duct cleaning in Almere: number of business establishments per sector according to CBS 2024 (chart)
Number of business establishments per sector according to CBS 2024. Source and reference date are shown below the chart.

Which sectors in Almere call for clean ventilation ducts?

With 226,500 inhabitants, Almere is the eighth largest municipality in the Netherlands by population (CBS 2024, rank 8 of 342). Its urbanisation level is 2, so strongly urban, with a density of 1,753 inhabitants per km². The 31,655 establishments are divided as follows, and per sector you can see which type of duct needs the most attention.

Sector (CBS 2024)EstablishmentsShareWhat to watch in the ducts
Business services7,90525.0%Office ventilation, supply ducts and grilles
Government, education and care6,37020.1%Classrooms, care rooms, hygiene inspection
Trade and hospitality5,31516.8%Kitchen extraction with grease deposits
Manufacturing and energy4,20013.3%Process extraction and dust load
Transport, information and communication3,56511.3%Industrial halls, server rooms, office sections
Culture, recreation and other services3,16510.0%Sports halls, public areas

Did you notice that government, education and care together make up more than a fifth? That is exactly the group where air quality weighs most heavily, because children, patients and older people spend long periods there.

Newly delivered ducts: why construction dust is an underestimated problem

A common belief among building managers: the building is only a few years old, so the ducts are clean. The RVO Frisse Scholen (Fresh Schools) guide says something different. It states that air ducts in newly delivered schools turn out to be contaminated with construction dust, and that is an argument for an inspection at handover. What applies to schools applies in principle to every new building: sawdust, plaster dust and packaging remnants easily end up in open duct sections during construction.

For managers of recently delivered property, this means you should not postpone the first inspection until complaints arrive. A camera inspection straight after handover shows whether construction debris is present. If there is something, you clean with a rotating brush and keep the duct section under negative pressure, so that the loosened dust is not blown into the room.

Ductwork cleaning Almere in schools and care: what do the rules require?

A few concrete arrangements apply to schools. Every classroom in primary, secondary and special education must have a CO₂ meter (Building Works Living Environment Decree (Bbl) article 3.143). The Frisse Scholen programme of requirements has three ambition levels, with CO₂ limits of 1,200, 950 and 800 ppm for class C, B and A. Frisse Scholen also asks for periodic technical and hygienic maintenance of climate installations. A contaminated duct or clogged filter makes it harder to achieve those values.

Employers in all sectors also have Working Conditions Decree (Arbobesluit) article 6.2: there must be sufficient uncontaminated air at the workplace and the air renewal installation must always be ready for use. For care organisations the hygiene side is added to that. More on this is under air duct cleaning in schools and, for elderly care, under nursing homes and care homes. The background of EN 15780:2025, which replaces the 2011 version, is under duct cleaning standards for cleaning contractors.

Which machine suits the ducts in your building?

The choice depends mainly on diameter, length and the number of bends. Below are the options from the range, with the specifications as Lamers and Danduct Clean publish them.

SituationDC4PD4Intelligent Airnozzle
Long supply ducts in a school building✓ up to 30 m reach✗ shaft up to 7.5 m✓ with camera
Diameter 100 to 600 mm✓✓ brushes separate✓ from 30 mm
Tight 90 degree bends✓limited✓
Drive230 voltspower drillcompressor or nitrogen
Viewing while cleaning✗✗✓ camera with LED

For a maintenance team that manages several school sites, the Electric DC4 brushing machine for businesses is often the starting point: the steel shaft keeps the brush in the centre of the duct and the left to right system rotates automatically. If you want to see all options side by side first, look at the full range of compare duct cleaning kits for businesses. For the PD2, Lamers provides the specifications itself.

Five steps to a ventilation check at handover

  1. Request drawings. Without a duct drawing you do not know where the hatches are. Eurovent advises inspection openings no more than 10 metres apart, or no more than two bends of 45 degrees or more between them.
  2. Camera inspection. Look at supply and extract, especially after the air handling unit.
  3. Assess. Check what you see against EN 15780. According to trade publications, medium risk buildings such as schools and offices use a dust limit below 3.0 g/m².
  4. Clean under negative pressure. Seal off the duct section and extract. If the extraction unit exhausts indoors, HEPA with 99.97% at 0.3 µm is the starting point.
  5. Record. Take photos before and after and note which sections are finished.

This step by step plan is also a good basis for a long term maintenance schedule: you immediately have a baseline measurement.

Three misconceptions about ventilation in recent buildings

"With new filters the ducts are clean too." Filters capture dust from the moment they are fitted. Whatever was already in the duct during construction stays there.

"The CO₂ meter shows green, so the ventilation is fine." CO₂ says something about the amount of fresh air, not about dust or microbiological contamination in the ducts. Milieu Centraal (Dutch public information centre) points out that moulds and bacteria can be blown along with the air when filters are dirty.

"Cleaning is something for ten years from now." There is no fixed legal term for non residential buildings. EN 15780:2025 works with inspection intervals per cleanliness class, expressed in months. Inspecting from the start prevents you from having to plan a complete cleaning round later.

Ventilation duct cleaning Almere: advice and quotes from Zelhem

Lamers Reinigingstechniek is a family business in Zelhem that has been supplying professional cleaning equipment for more than 50 years. There is no branch in Almere; you arrange advice and quotes by phone, by email or through the form. On the product pages you can request a quote, request a callback or ask a question.

If you also work in the region around the capital, look at air duct cleaning in Amsterdam or at ductwork cleaning for Utrecht businesses. The overview of all municipalities is under all cities for air duct cleaning. If you already know which diameters and lengths you have, you can contact Lamers for cleaning contractors straight away.

Air duct cleaning equipment from Lamers at a glance

Frequently asked questions: air duct cleaning Almere

Why should I have the ducts in a new school building in Almere inspected?

According to the RVO Frisse Scholen guide, air ducts in newly delivered schools turn out to be contaminated with construction dust. An inspection at handover shows whether sawdust, plaster dust or other construction debris is lying in the supply. Then you can clean before pupils breathe that air, and you immediately have a baseline for later maintenance.

How many businesses in Almere have ventilation maintenance to consider?

CBS counts 31,655 business establishments in Almere for 2024. Of these, 7,905 fall under business services (25.0%) and 6,370 under government, education and care (20.1%). Not every establishment has its own air handling, but offices, schools, care locations and commercial kitchens usually have ducts that need maintenance.

Which equipment suits long supply ducts in an Almere office or school building?

For long ducts the DC4 from Danduct Clean is suitable: up to 30 metres reach, diameters of 100 to 600 mm, round and rectangular, and also through 90 degree bends. If you need to see inside the duct, the Intelligent Airnozzle with built-in camera is an addition. Lamers advises which combination fits.

Is there a legal cleaning interval for air ducts in commercial buildings in Almere?

No, there is no fixed legal frequency for non residential buildings. However, under Working Conditions Decree (Arbobesluit) article 6.2 the air renewal installation must always be ready for use and there must be sufficient uncontaminated air. EN 15780:2025 gives inspection intervals per cleanliness class, and you use those as a guide for your planning.

Does Lamers have a branch or service point in Almere?

No. Lamers Reinigingstechniek is based in Zelhem, in the municipality of Bronckhorst. For businesses in Almere, contact runs by phone, email or the form on the website. There you request a quote, request a callback or ask a question about the right machine for your ducts.

What does a CO₂ meter in an Almere classroom say about the condition of the ducts?

A CO₂ meter shows whether enough fresh air is coming in. Frisse Scholen uses limits of 1,200, 950 and 800 ppm for class C, B and A. That value says nothing about dust, mould or construction debris in the ducts. For that you need a visual or camera inspection.

Can a maintenance team in Almere clean ducts itself with its own equipment?

Yes, that is possible if you have the right equipment and a working method with negative pressure. You seal off the duct section, extract with filtration and clean with a rotating brush or compressed air. For schools and care it is sensible to separate inspection and cleaning, so that the assessment stays objective.

Which dust limit do schools and offices in Almere use as a guide value?

According to trade publications on EN 15780, medium risk buildings such as offices, hotels and schools use a dust limit below 3.0 g/m², and up to 4.5 g/m² for secondary ducts. Those values come from trade articles and not directly from the standard, so use them as a guide and not as a hard requirement.

What should I check on the ventilation at the handover of a building in Almere?

Request duct drawings, check whether there are inspection hatches and have the supply after the air handling unit viewed with a camera. Record photos. Eurovent advises hatches no more than 10 metres apart or after at most two bends. Without that access, cleaning later becomes difficult and expensive.

How do I request a quote for cleaning equipment from Almere?

First collect the diameters, duct lengths, number of bends and whether the ducts are round or rectangular. With that information you request a price through the quote form or ask for a callback. Lamers then advises on the suitable machine, brushes and sealing materials.

Sources and reference date

All facts on this page were checked on 6 October 2026.

Editorial team: Lamers Reinigingstechniek B.V., supplier of professional air duct cleaning equipment in Zelhem, the Netherlands. Updated on . See also the family business Lamers for businesses.

Request a quote or advice from Lamers

Air duct cleaning in Almere: portrait of René Hendriksen, Sales Account Manager at Lamers Reinigingstechniek (next to the quote form)

René Hendriksen, Sales Account Manager at Lamers, advises you on the machine, brushes and extraction for your jobs.

Briefly tell us what you clean (duct type, diameter, length, contamination and sector). Lamers will contact you with advice and a tailored quote.

Prefer direct contact? Call +31 (0)314 623 341, message us on WhatsApp 06-38048347 or email info@lamersequipment.nl.

Prefer a quick call first? Lamers will call you back

Air duct cleaning in Almere: rené Hendriksen, Sales Account Manager at Lamers, in an AI video in an office with an air purifier (video poster next
René Hendriksen, Sales Account Manager. AI video, 10 seconds.

Leave your number. René Hendriksen or a colleague from Lamers will call you back to discuss duct type, diameter and the right equipment.

Request a quote06-38048347